Development of an autonomous omnicopter aerial vehicle
Date
2016-08-01
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Traditional multirotors and helicopters control translational movement by changing
the orientation of the entire vehicle. This limits the effectiveness of such vehicles in
applications as a mobile manipulator base. In these applications it is often necessary
to fly in proximity to large structures where unpredictable aerodynamic conditions
exist. In order to maintain precise control of position it is necessary to counteract
disturbance forces quickly, and, due to the delay induced by rolling and pitching
the entire vehicle, traditional multirotors and helicopters have a limited ability to
maintain position precisely. Additionally, a mobile base must be capable of resisting
arbitrary combinations of force and torque resulting from use of a manipulator arm.
This is also not possible for traditional multirotors and helicopters.
A novel Unmanned Aerial Vehicle (UAV) concept is presented which features the
addition of four rotors directed orthogonally to the main lift rotors of a traditional
quadrotor design. These rotors allow de-coupling of orientation from translational
movement.
Tests done on a physical prototype demonstrated improvements in disturbance rejection and an ability to roll or pitch up to 20 degrees independently of translational
movement, including the ability to move backwards at an angle. This type of motion
is impossible for a traditional multirotor vehicle.
By adding a goal velocity term to the control algorithm, the ability to match the
position and velocity of a moving target was demonstrated. This, combined with
the ability to control orientation independently of the direction of flight, gives the
OmniCopter the ability to land on or dock with a moving target.
Description
Keywords
UAV, Multirotor, Mobile manipulator, Omni-directional